Filtration Features
ADVANCE FILTRATION SYSTEM (AFS-8-200)
FILTRATION FEATURES
CLEANING CYCLES
OPERATOR INTERFACE
FILTRATION SYSTEMS
>> AFS-8-200
(Shown below as Multi-Units Central System)
Coolant Filtration Systems
• Up to 50 bar (800 psi) coolant pressure
• Large Oil Reservoir up to 2000 liters(530 gallons)
• Filtration of particles as small as 5 Microns
• Cleaning rate per filter dome 200 – 300 l/min (53-80 gpm)
• Extends coolant lifecycle
• 8 m² (86 ft²) filter area per dome
• Chiller rating 92,000 btu/h (options available)
• Recovers more coolant than vacuum or centrifuge systems
• For filtration of steel, carbide, ceramic, glass & other materials
• Coolant temperature maintained within 0.5 °C (1°F) for ultra precision grinding
ITM filters are equipped with a fully automatic sludge dryer in place of a standard vacuum system, to separate oil from the grinding sludge. After the filter has been dumped, the dirty oil with sludge is pumped into the dryer unit. the oil is separated and returned to the cleaning cycle by pressing it out of the sludge with the use of up to 6 bar (90psi) air pressure. The cake, which is left, is then dried and automatically dumped into a disposal bin.
DE is being used as a filter media in the beverage and water cleaning industries and has proved it’s superiority and safety. Properly handled, DE in not hazardous to the health.
